|
Click image to Zoom |
Sunbeam series of street lighting luminaries, can be used for
the street lighting applications using solar energy. The SPV module
and the battery can be directly fitted to this lighting luminary
with necessary mechanical structures. The Solar streetlighting luminary
is available with or without charge controller. Automatic dusk to
dawn opeartion (DTDC) as well as timer controlled automatic operation are
offered in different models. The mechanical design is best suited
for out door application. Highly reliable electronic circuit realised
with good quality electronic components ensure trouble free operation
and long life to the CF lamp.
SunBeam-11 is the base model of this series, which uses a Compact Fluorescent Lamp of 11W as the light source.
|
- Fitted with compact fluorescent lamp (CFL)
- Elegant and robust design suitable for out-door use
- Built-in high frequency inverter and charge controller
- Anodised aluminium reflector
- Insect entry protected
- Directly compatible for solar streetlighting systems
- Excellent light distribution
|
Top
| SunBeam -11 |
Model-1 |
Model-2 |
Model-3 |
| General |
| Application |
Solar street ighting, Outdoor use |
| Operation |
Manual |
DTDC Automatic |
Preset Timer |
| Lamp Type |
Compact Fluorescent Lamp, 4 pin, Single U |
| Lamp Wattage |
11W |
| Electrical - Inverter |
| Rated working voltage |
12V DC |
| Working voltage range |
10.5 to 14V DC |
| Type, Frequency, Crest factor |
Quasi Sine wave, Free running,
24-28 kHz, Crest Factor < 1.6 |
| Inverter Efficiency |
>85% |
| Electrical - Charge Controller |
| Charge controller |
No charge controller |
6A charge controller |
6A charge controller |
| Charge controller type |
NA |
Series pulsed two step |
| Charging current (Solar) |
NA |
6A Max. |
| Solar Module Size (Max.) |
NA |
90Wp |
| Indications |
NA |
Charging and low battery & Low Battery warning |
| Protections |
NA |
Module reverse current,
overcharge, deep discharge, reverse polarity, over load |
| Connecting cables |
| Luminary to Solar PV Module |
NA |
2.5 sq mm with fork terminals |
| Battery to luminary cable |
2.5 sq mm cable with ring
and fork terminals |
| Sensing cable |
NA |
0.5 mm2 with ring &
fork terminals |
| Mechanical |
| Fixing |
Pole mounting with mounting
bracket |
| Canopy (Case) |
Injection moulded engineering
plastic weather,water and insect proof |
| Bowl (Light diffuser) |
UV stabilised, non yellowing
acrylic |
| Reflector |
Highly reflective anodised
aluminium |
| Size (Shipping) |
420x190x110 mm |
| Weight (Shipping) |
2.0 Kg |
2.3 Kg |
| Ordering code |
Model |
Lamp |
Charge controller |
Battery Type |
Operation |
| 041-001 |
SSL-11121A |
CFL-11W |
Nil |
N.A |
N.A |
| 041-002 |
SSL-11122C |
CFL-11W |
Built-in (12V,6A) |
Tubular |
DTDC |
| 041-003 |
SSL-11122D |
CFL-11W |
Built-in (12V,6A) |
VRLA |
DTDC |
| 041-003 |
SSL-11122D |
CFL-11W |
Built-in (12V,6A) |
Tubular |
Timer |
| 041-004 |
SSL-11123C |
CFL-11W |
Built-in (12V,6A) |
Tubular |
Timer |
| 041-005 |
SSL-11123D |
CFL-11W |
Built-in (12V,6A) |
VRLA |
Timer |
| Note: Models and specifications are subjected to change without notice. |
Top
|
|
