|
Click image to Zoom |
This is a Power conditioning unit (PCU) with special design feature for using in the area that the utility line is weak and Renewable Energy (RE) source are available. The PCU is designed to provide energy convertd from RE sources as the first priority and capable to provide energy from the grid line when energy from the RE source is lower than the et level. The inverter also keep some energy in the battry for standby use. Ammini Solar introduces a series of innovative Solar Power Conditioning units. This bidiretional hybrid inverter is specially designed to operate with solar battery charging system, AC input and external charging system. Main power source of the inverter is solar panels, which produces direct current from sunlight. The inverter converts the DC into AC to supply to the electrical appliances and equipments. The excess DC will be stored in the battery bank. In case of inadequate Dc from Solar Panels, the inverter will stop inverter mode and transfer the loads to AC input. If AC input fails, the inverter will continue running in inverter mode and start operating with external charging system when the battery level is low.
|
- Microprocessor controlled
- Solar power operated
- Built-in charge controller
- Maximum Power point tracking (MPPT) included
- Built-in Automatic voltage Regulator (AVR)
- Pure sine wave
- Built-in over voltage and short circuit protections
|
Top
| General |
| Application |
Solar Electrification with Energy Management Function |
| Operating Temperature |
0 to 45 degree celsius |
| Indications |
Inverter ON/PVCharging/DC input/Auxiliary ON/Fault/Over Temperature/Charge/Battery level/Load Level/ Overload |
| Inverter |
| Nominal Power |
1KVA |
| Surge Power |
200% for 2 seconds |
| Nominal System Voltage |
24V |
| Battery Voltage Range |
22.0 - 29.0VDC |
| Nominal Output Voltage |
230VAC |
| Inverter Type |
Pure sine wave |
| Output Frequency |
50Hz &plusmin 1% |
| Effeciency Max |
>80% |
| Solar Charge Controller |
| Type |
PWM Charge, MPPT incorporated |
| Maximum SPV Array Power |
720Wp |
| PV Open Circuit Voltage |
96VDC Max |
| MPPT tracking voltage range (Vmp) |
26-70 V DC |
| Charging Current |
30A Max |
| External Charger |
| External Charging Current |
30A Max |
| Safety |
| Protections |
Over Charging; Deep discharging; Overload; Over Temperature Fault |
| Shipping Details |
| Dimension |
38x36x21 cm |
| Weight |
25 Kg |
| Ordering Information |
| Model No. |
PCU-NDAE0A |
| Note: Models and specifications are subjected to change without notice. |
Top
|
|
